Paper snowflake

A simple fourfold snowflake made from a square. The cut pattern is original to this lesson. Use small scissors and keep the folded center intact until the final opening.

Use your browser’s print menu to print this guide or save it as a PDF.

Before you begin

1 sheet · Square paper

15 × 15 cm

Scissors needed

This lesson is being checked for folding accuracy. It has not yet passed a physical fold-through review.

Step-by-step instructions

Read through the fold before you begin, or open any step in the folding viewer.

Start with a light square
Use thin paper that your scissors can cut comfortably in several layers.
Look for: Keep scissors beside your workspace.
See this fold
Fold a triangle
Bring one corner to its opposite corner.
Look for: A broad triangle lies flat.
See this fold
Fold a smaller triangle
Bring the two ends of the long edge together.
Look for: Four paper layers form a smaller triangle.
See this fold
Fold the triangle once more
Bring the two long sides together to make a narrow wedge.
Look for: The folded center is the narrowest point.
See this fold
Shape the outer edge
Cut a shallow diagonal across the open outer end, keeping the narrow folded center.
Look for: The open ends have a clean sloping edge.
See this fold
Make a small notch
Cut a small triangle from one long folded edge. Stop well before cutting across the entire wedge.
Look for: The remaining paper stays connected.
See this fold
Add a second notch
Cut a smaller notch from the other edge at a different distance from the center.
Look for: Two separated notches decorate the wedge.
See this fold
Open with care
Unfold one layer at a time. Ease apart any corners caught in the cuts, then flatten under a book if desired.
Look for: Your cuts repeat around a fourfold paper snowflake.
See this fold